SUN COATING COMPANY is an   APPLICATOR  of TECHNOLOGICALLY  ADVANCED   COATINGS  used Worldwide

Custom Industrial CoatingsChemours® Teflon®Whitford Xylan®Excalibur®Sunoloy®Dow Corning Molykote®Solvay Solexis Halar®Wearlon®ECL Friction Fighter®NIC - CerakoteTMSandstromOther Coatings OfferedCoating Properties
  • Abrasion Resistance
  • Anti-GraffitiAnti-Stick
  • Corrosion Resistance
  • Dry Film Lubrication
  • FDA Compliance
  • Galling
  • High Temperature
  • Low Friction
  • Noise Reduction
  • Release
  • Wear Resistance
Quality CertificationsISO 9001:2008ISO/TS 16949:2009

Wearlon® Industrial Coatings

 Wearlon® Industrial Coatings

 

(click on thumbnail to enlarge)

Wearlon Marine Coatings
Wearlon Marine Coatings
The unique waterborne Wearlon chemistry grafts silicone molecules to epoxy molecules, thereby distributing the silicone throughout the epoxy matrix. There are no free silicones. We are able to control the "non-stick"-ness of the system by adjusting the ratio of silicone.

  • Silicone is the non-stick, hydrophobic, lubricious component.
  • Epoxy is the hardness, adhesion component.

Wearlon is water based, non-toxic, environmentally friendly, low V.O.C. and meets EPA, USDA and FDA 21 CFR 175.300 requirements.

How Different is Wearlon?

Non-Stick
The non-migratory, non stick properties of Wearlon make it ideal for use as a maintenance coating, with many processing aid applications in the manufacture of plastics, paper, textiles and packaging over a wide temperature range, wet or dry.

Foul-Release
The hydrophobic, low surface energy, non-stick properties of Wearlon result in low biofouling adhesion. This is true of Zebra Mussels, Quagga Mussels and all bacterial and algal bioforms. Of course the low adhesion applies to other substances too, like spray paint, ice, tar, grease and other potential contaminates. Foul-release means easy clean.

Maintenance Friendly
Wearlon's hard abrasion resistant properties and its excellent adhesion to a wide range of substrates makes it conducive to repeated cleanings by water jet or "pigging" system during routine planned maintenance shutdowns. It won't just flake off or wear away!

Lubricity
The friction reduction properties of Wearlon make it suitable as a dry lubricant for slide valves, cutting blades, head gates and rails and other moving components.

Anti-Corrosive
Wearlon offers superior surface protection in both fresh and salt water environments, and extends the life of steel, iron, aluminum, concrete and a wide range of other substrates.

Low Environmental Impact
From the low VOC rating of Wearlon's water base chemistry to its non-toxic, non-leaching working principle, Wearlon has minimal environmental impact.

And Much More!
Wearlon's foul release system is actually a full maintenance coating system with all the properties you would expect from a premium maintenance coating system: above and below water performance; wide temperature operating range; excellent Solvent Resistance; thin film, single coat protection.

 

Back to top     Last Page

Sun Coating Company